|
1951 Chevy Accessories Installation Manual |
|||
|
3. Lift rubber weatherstrip on inside of door,
to allow mirror bracket to mount to door edge.
4. Insert clamp and with fiber pad in place
between diecast base and
outside of door (to protect
finish), tighten screws securely and replace weatherstrip as shown in figure
139.
Approximate Flat Rate Time .1
of an hour.
986441 REAR VIEW MIRROR BRACKET
-TRUCK
Procedure
for Installation of
Rear View
Mirror Bracket
on All
Model Trucks. |
template
on outside of cowl on the right-hand
side of the body, lining up with body contour as indicated. Center punch and drill
two 11/32 inch
holes.
2. Attach
brackets as shown in figure 141. Do not tighten nuts until extension mirror is
assembled in
brackets. |
||
 |
|||
 |
|||
|
Figure 142
3. Assemble extension mirror in brackets
using stud, lock washers
and nuts furnished as shown in
figure 142.
4. Tighten all nuts and adjust mirror to
suit.
5. For Left-Hand Installation: Remove existing
mirror bracket and use
existing holes in cowl.
Approximate Flat Rate Time .2 of
an hour. |
|||
|
|
|||
|
Figure
140 1. For Right Hand Installation.
Locate drilling |
986533 LEFT-HAND DOOR TOP OUTSIDE
MIRROR |
||
|
|
|||
 |
|||
|
|
|||
|
Figure 141 |
|||
|
|
|||
|
59 |
|||
|
|
|||
| « PREVIOUS PAGE | CONTENTS PAGE | NEXT PAGE » |
|
|