|
1951 Chevy Accessories Installation Manual |
|||
|
Control
The windshield wiper control is
your windshield washer control. Push
button and release to operate washer. Turn knob to operate
wipers.
Care and Operation
The
windshield washer is operated by surplus vacuum from the engine. For best results
remove foot from
accelerator pedal while the valve is turned on.
CAUTION: Great care should be
taken to avoid filling the pin hole
opening in the jet, particularly with wax in polishing of cars. Keep
pin hole opening clean. Do not use other cleaning solutions or chemicals as they may damage
car finish or washer parts. If
nozzles do not eject a full
stream of liquid or if both nozzles are not equalized, relieve hoses of all
restrictions. To clean jets
take out screw at end of jet and poke wire through pin head opening while
washer is flushing.
Insert screw and tighten securely after cleaning process is
completed.
Winter Use
The use of
the washer in freezing temperature is
not recommended. The system should be drained but if for any reason winter use
should be required, a special harmless all season solvent can
be secured from any authorized General
Motors Dealer at a nominal price |
with complete instructions on the bottle
regarding its
usage.
Approximate Flat Rate Time .9
of an hour.
986527 WINDSHIELD WASHER -
FOOT OPERATED
Procedure
for Installation of
Windshield Washer on All Model
Trucks. |
||
 |
|||
|
Figure 229
1. Locate
and drill all holes as shown in figure 228. Then install windshield
washer |
|||
|
|
|||
 |
|||
|
|
|||
|
Figure 228 |
|||
|
|
|||
|
93 |
|||
|
|
|||
| « PREVIOUS PAGE | CONTENTS PAGE | NEXT PAGE » |
|
|