|
1951 Chevy Accessories Installation Manual |
|||
 |
force
wheel ring into rim engaging position with both hands as shown in figure
161. |
||
 |
|||
|
Figure 161
2. Force
opposite portion of wheel ring further into position, pressing inwardly with hands
all the way around the rim, using either one or two hands until the wheel ring is almost
seated as shown in figure
162. |
|||
|
Figure 159
3. For
installation on left-hand door, turn template over and proceed as outlined for
right-hand installation.
Approximate Flat Rate Time .2
of an hour. |
|||
 |
|||
|
986258 STAINLESS STEEL WHEEL RINGS
Procedure
for Installation of Wheel Rings on All
Model Passenger Cars. |
|||
 |
|||
|
Figure 162
3. The small wooden block which accompanies
the wheel rings should be used
in conjunction with a
light hammer to gently tap the wheel ring into its bottom position so that
outer portion of the ring is
flush with the wheel
ring.
4. Repeat operation for the four remaining
wheels. |
|||
|
Figure 160
1. While
holding the lower portion of the wheel ring in position at the valve stem,
partially |
|||
|
|
|||
|
66 |
|||
|
|
|||
| « PREVIOUS PAGE | CONTENTS PAGE | NEXT PAGE » |
|
|